Bob's Studebaker Resource Website
C/K Frame with Mustang II Clip
Also available at extra cost ($200.00) to make a rolling chassie ....springs,
rear axel housing and differential ratio 3.75...2 rear wheels with tires,brakes
& drums ...and a basic two piece stude drive shaft. These used items need deep
cleaning and will have to be installed. EBAY - azbillinda9cl2 - March 2010
Studebaker C-K frame with Fatman Stage II Hub to Hub independent front suspension
(IFS) 2" dropped spindles, the stub was installed by a professional. Frame has
had ALL rust removed to the metal and painted black with POR-15. Frame has a
power rack and pinion; it comes with two 14" wheels that will clear calipers
and two new tires. Frame has tubular motor mounts from Fatman for chevy 305/350,
right side has been welded in place; left side has been prepared for welding
during engine installation (see picture of single mount). However, these motor
mounts can be removed and other motor mounts can be installed, such as for a
Stude 289. This is a 120.5 inch wheel base frame and it is ready for your 'off
frame' Hawk restoration or ratrod, plus it has been upgraded for power rack and
pinion steering. Frame has NOT been used since IFS installation and painted.
Frame can be rolled on front wheels by one person. A BIG change in my plans have
make this frame available because many man-hours were spent on this frame!
|