Apr 2007
--------
//////Just a little info if you have to take it to the transmission shop///
"". We have to order the parts, yea, you bet ya"""......

For those of you with flightomatics with a bad rear seal and/or bushing. Parts for those are 
available, C-4, C-5 ,or AOD transmissions use a matching output shaft bushing. For a rear 
seal you have two choices the C-4, C-5 or AOD,without the boot,and chev 350or 700 up to
 1996 will work. 
. If you have to change the rear bushing,extension housing will have to be removed, 
be sure that the rear band is tightened up all the way, so it will keep the output shaft 
from backing out; it keeps thrust washers in position..
 Lou Cote 
Marysville, Washington
USA