Studebaker steering parts ( Belcrank -Support Pin ) |
Centerpin with bushings
Part #700002 Replacement kit
Part #5251379 Bushing replacement
Note: Pin housing shaft diameters are not the same. The diameter of the pins with bearings is different than that of the pins using bushings. However, both housings (1209-14) will fit the chassis and the belcrank arm will bolt up to both.
Centerpin with bearings Better choice
Part #700001 Replacement kit The adjustment is made using Shims / Add or remove to adjust play / less equal tighter
You can add a third bearing to the shaft also Ray Ficthorn - 2003
|