NOTES: Last update Apr 2018- Look for latest info by dates appended to parts line

Avanti/ disk brake Hawk
When changing to a dual circuit master cylinder, make SURE you obtian one that is for a Disk/Drum setup / Make SURE you know which PORT is for the front brakes (NOTE: applications from GM/Chrysler/Ford can differ as to which end is for the disks. ) The best rule of thumb is ..... ///// ( THE PORT WITH THE LONGEST STROKE IS FOR THE FRONT BRAKES) and is easily observed by looking at the profile of the MC /////// The MC must have at least ( .937 (15/16) to 1.125" (1 + 1/8") bore for disk brakes Any MC, with less than a .937 bore, will require too much pedal travel on a disk brake car, as the fluid requirements to push the pistons, is much larger than drum/drum. Parts with "H" at the end are shown on http://www.studebaker-info.org/tech/repavmc.html ------------------------------------------------------------------------------------------ Avanti with 4 bolt mount MC-63-64 Avanti (4-bolt, dual circuit - 68/69 Chrysler New Yorker/300 (Crall sep 2002)(H). Noted as the same as a Wagner 64874. Connect the rear cylinder to the rear line. MC - 63-64 Avanti (4 bolt, dual curcuit)67 Dodge Monaco w/pwr brakes+front discs.(H)(June 2005) MC - 63-64 Avanti (4 bolt - dual circuit) - Bendix #11323 MC - 1967-1970 Mopar A/B/C Bodied with DRUM brakes...with or without power brakes. (H) MC - 63-70 Avanti (Replacement, dual circuit - mid 70's Chrysler. NAPA #36307. Turning Wheels, Apr01 (Jim Turner , Jan 2003)(H) MC (for above) 77 Chrysler M/C NAPA/United 36307(cross references to Bendix 11515) no check valves, and no proportioning valve(H) MC - 63 - 64 Avanti - 4 Bolt - Autospecialties Company, # M-83014 ( Sep 2004) MC - 63-70 DUAL circuit - 4 bolt - (Avanti / RQA Avanti II) used a Wagner #64874 - 68/69 Chrysler New Yorker. (H) MC - 63 - 64 Avanti (all) Master Cylinder 1557910 Wagner F27047 Require Larger Fittings ====================================================================================== Avanti II (2 Bolt mount) MC - RQMC - DORMAN #64822 - Bore .937 (15/16) $48.99 ( 18 April 2018) (H) MC - RQMC - Master Cylinder 1973 Avanti - Same as 67 Ford Fairlane 500 w/ Disc Brakes - NAPA TS101379 - Bore Size:0.93750 (H) MC - RQMC - Dual Master Cylinders Avanti II (2 bolt) for Avanti '71 - '83 are 1971 Ford Torino Wagner #F75811 15/16" bore / Raybestos MC36248 15/16" bore MC36225 1" bore / " MC36277 1" bore, but fittings are 1/16 " bigger to brake lines - Bendix R11646 Ford fairlane 500 disk brake cylinder from 1967 -? (H) MC - RQMC - 87 Avanti - uses a 1968 Ford Galaxy MC ( for disk brakes) NAPA TS 101375 (Has forward line down) MC - Master Cylinder - 72 Avanti- RQB1804 - 1969 Torino with disc brakes. MC - Brake Booster Master Cylinder 1976 - 1982: Bendix 2510302 MC - Master Cylinder - 78 Avanti - Bendix #11642; A1 Cardone (nationwide rebuilder) #10-1379. 69-71 Ford Torino w/power disk/drum 71-83 (May 2002) (H) MC - 78 Avanti - 70's Mercury Marquis. My original had the front port UNDER the front portion with a bleed valve in the front SIDE port. (See NAPA found an illustration that matched my original-- their number 36249. Mercury and Ford listings found that master listed for all '67 Thunderbirds. Kragen) rebuilt (fenco #M1410) was in stock w/ lifetime warranty for $23.99. Exact match. Ask for a '67 TBird master and it should be perfect match. Dave '78 RQB 2670 Jly 2003 MC - 78 Avanti - My '78 used a master cylinder from a '66 Tbird Jun 2005 (RefrigMan@aol.com) MC - 87 Avanti - Bendix # 11646 from a 1969-71 full size Ford (MAR 2003) MC - 87 Avanti - Bendix #11642 This is for a 67 Ford Fairlane 500 with front disc brakes with the 390 engine. I just replaced mine on the 87 Avanti and it was an exact match. Jun 2005 (dgreene944@aol.com) MC - 87 Avanti - NAPA Part #36277 and is a perfect match. (Keith Brooks May 02) (H) (Note: Above MC can be backward compatible to 1971 / rj 21092017) ====================================================================================== Underfloor MC - 47-64 Stude - Car Quest part # E2796 ($42.50) ( Oct 04) MCRK 62-64 Hawk (Kit) 60 American Master Cyl(note 1) MC 266 MC - MCRK - 63-64 Master cyl repair kit - Bendix - #2800 MC - 62 - 64 Hawk- M/C Assembly NAPA 2796 (H) MC - 53-64 all V8 models - Carquest part # is BPR-20-2796. Sells for $60.00 (Jan 2003) MC - 63-64 Avanti FIlko 427 Motorcraft MC-244 MC - EIS E 40413- Master Cylinder replacing EIS E39988 which is discontinued. Fits '63-'66 MC - Turner Dual Bracket for Hawk -Raybestos MC36237, it had the lowest profile of those on the list. Bondobill Aug02(H) MC - Master Cyl - 63 - 65 lark types - the rambler master cyl #36237 from Napa auto will work on studes 63-65(Apr 2005) jit29@zianet.com(H) MC - 66 cars - M/C for a 1974 CJ Jeep (standard brakes)(Mar 2003) NAPA TS101292 (H) MC - 65 Commander ( All Drum) - napa# 36237 / raybestos #mc36237 (H) MC - 64-66 -Wagner F56193 (Non-PB) (nov 2007) MC - 64' Cruiser/power drum brakes - Carquest #BRK E 56193. direct bolt on/ even the brake lines bolt up (SDC FORUM #2502) Dennis Croft, Roseburg, OR - May 2009) Repair Kits MC -MCRK - 62 - 64 Hawk -M/C Repair Kit NAPA 137 (disk or not) MC - MCRK - Master Cyl Repair Kit - 63-64 Avanti - Bendix #4227AX MC - MCRK - 63 - 64 Avanti (all) Master Cylinder Rep Kit 1558183 Bendix 2986 Bendix 4227AX Bendix 617965 Wagner F 19372 Adjust Rod To Depth of Piston BOOSTER MC - BRAKB - Avanti brake booster and MC -1973 Plymouth Fury Booster and Dual master cylinder fit perfectly dicktygielski@peoplepc.com Jan 2002 MC - RQMC - 1973 Plymouth Fury Brake booster and Dual MC fit perfectly to replace the original Avanti Booster and single MC MC - Prior 2502302--- Rebuilt master Cylinder and brake booster Prior Brake Reman.