Introduction
ENGINE DISSASSEMBLY
Removing Parts off Top of Engine
Video #1
12/29/19
Removing Distributer, Valley Cover
Filler/Vent Tube & Lifters.
Video #2
12/29/19
Oil Filtration Discussion
Video #3
12/30/19
Removing front crankshaft pulley
harmonic balancer,
crankshaft hub & gear
Video #4
12/31/19
Removing the oil pan & oil pump
Video #5
1/4/2020
Attempt to remove the
connecting rods & crankshaft
Video #6
1/8/2020
Connecting rods & crankshaft
removed from seized engine
Video #7
1/9/2020
Removing freeze plugs, oil plugs, cam bearings,
motor mounts, oil pressure relief valve
Video #8
1/14/2020
Disassembling the cylinder heads
Video #9
1/19/2020
Repairing the Filler Block
Video # 10
12/12/19
Disassembling/Inspecting the Oil Pump
Video # 11
Installing Front Timing Cover &
Crankshaft/Hub Seal
With Ted Harbit /
VIDEO# 12
12/18/19
Rebuilding the Oil Pump
Video # 13
12/27/19
Removing Cast Iron Flashing
From Engine Block.
VIDEO# 14
Studebaker V-8 engine block
discussion
VIDEO# 15
2/19/20
Studebaker V-8 engine block
thread chasing
VIDEO# 16
02/20/2020
Modifying crankcase ventilation
in the block
VIDEO# 17
2/20/21
Cleaning and oiling the engine block
VIDEO# 18
2/20/23
Plugging holes on the rear
of the engine block
VIDEO# 19
2/20/25
Installing camshaft bearings and
front oil galley holes
in the engine block
VIDEO# 20
2/20/27
Installing pistons on the connecting rods
and pistons in the engine block
VIDEO# 21
3/6/20
Installing the crankshaft in the engine block
VIDEO# 22 (sic)
3/6/20
Installing the Timing Gear on the Crankshaft
Video # 23
11/8/20
Installing the Oil Pump
Video # 24
11/9/20
Discussion on engine modification
Video # 25
11/10/20
Installing Camshaft Timing Gear & Camshaft
Video # 26
11/11/20
(Installing Front Timing Cover & Crankshaft Hub
Video # 27
11/12/20
Installing The Oil Pan
Video # 28
11/13/20
Installing The Valves In The Cylinder Heads
Video # 29
11/15/20
Installing The Cylinder Heads
Video # 30
11/16/20
Installing The Lifters, Push Rods & Rocker Arms
Video # 31
11/18/20
Torquing The Cylinder Heads
.
Video # 32
11/21/20
Installing The Front Vibration Damper/Flywheel
.
Video # 33
11/22/20
Setting The Valve Lash
Video # 34
11/26/20
Installing The Top Valley Cover
Video # 35
11/30/20
Painting The Front & Top Half of the Engine.
Video # 36
12/1/20
Installing the Intake & Water Manifolds
Video # 37
12/4/20
Painting the Engine & Freeze Plug Installation
Video # 38
12/5/20
Oil Filter Selection & Priming Engine with Oil
Video # 39
12/11/20
Sep 2020
WINDSHIELD
Installation -
Video 1
Installation -
Video 2
Studebaker Windshield Installation
Video# 3
9/27/20
Studebaker Windshield Installation
Final Video #4
9/29/20
