Originally Posted by
52 Ragtop
Tom,
That makes no sense! IF that rotor is made for a specific vehicle,
then, the original bearings should work. IF it is made for a Chrysler
(whatever, I do not know what he used) then a rotor made by other
vendors than Bendix should work. UNLESS, it is boxed wrong, which I have
run into with theMustang rotors.
Dave's kit uses a spacer inside the rotor, where as my kit uses a spacer
on the spindle. The use of a spacer is needed because the Studebaker
spindles are extremely long compared to most others.
BTW, Bendix rotors are also made in China, I ran raybestos out of US made rotors about 5 or 6 years ago. However, although expensive, the Mustang crowd will not let the Mustang rotors go away!
That is the main reason I stay with those, That and the fact that other
than the spacer on the spindle, there are no other modifications
needed.
Jim