Studebaker Drivers Club, Inc.®
Studebaker Drivers Club, Inc.®
Home | Profile | Register | Active Topics | My Subscriptions | Members | Search | FAQ
You are logged on as
55Prez
 All Forums
 Your Studebaker Forum
 Technical Talk
 The Correct PCV Valve for R1 and R2
 New Topic  Reply to Topic
Subscribe to this topic Subscribe to this topic
 Send Topic to a Friend
 Printer Friendly
Author Previous Topic Topic Next Topic  

StudeRich
Commander Member

USA
6033 Posts

Posted - 06/03/2009 :  3:53:21 PM  Show Profile  Email Poster  Reply with Quote
The 1562731 PCV Valve allows the correct amount of restricted flow to the Carb. (vacuum) and BLOCKS ALL FLOW from the Carb. (Backfire/Pressure)


It does rattle, probably has no spring, and seats (closes) on a tapered seat like a Carb. Float Needle in the hose end, and when Vacuum is present it restricts flow to the space space between the three flat sides of the needle & the tube.

FYI: Just to set the record straight to prevent anyone from damaging their engine, from my experience and to my knowledge this is how it works, and what it looks like.

StudeRich
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
Subscribe to this topic Subscribe to this topic
 Send Topic to a Friend
 Printer Friendly
Jump To:
Quick Reply
Message: 

* HTML is OFF
* Forum Code is ON



 

Studebaker Drivers Club, Inc.® © 2003-2009 Studebaker Drivers Club, Inc. The SDC logo is a registered trademark. All rights reserved Go To Top Of Page
This page was generated in 0.14 seconds. Powered By: Snitz Forums 2000 Version 3.4.06