Bob's Resource Website (2007)
Studebaker Ignition Switch



Jan 06

----------
bayonet style ignition switch - Studebaker from 1955 through 1966

-----------------
NAPA auto parts # KS 6180. It is exactly like the stude switch except the bezel will not work. You can take the guts out and put it in your switch housing, or take the KS 6180 tumblers out and put them in the Stude switch, or you can just use the KS 6180 as is. These switches are sold in lots of FLAPS under lots of names, but all seem to be by the same manufacturer.The hookup on the switch is the same as the stude. ellenslover@lycos.com -------------
Editors note: Switching the internals as described above, is not
for the uninitiated.
180106a.jpg 180106b.jpg


These pages and programming contained therin are © 1996 - , Bob Johnstone and may not be reproduced without the permission of rfjohnstone at cox.net All Rights Reserved.
Some technical opinions are my own from experience, other informational data is from online sources with credits when available and while care has been taken to be as accurate as possible, it is offered only as a guide and caution should be exercised in the application of it.